Stiletto Masonry Fireplace Glass Door

Be sure to take all measurements to the nearest 1/16” using a steel tape measure. Note any irregularities around the opening of the fireplace, such as projecting or recessed brick, and advise us before you place an order. For complex custom applications, a photograph of the fireplace will prove very helpful.

 

OVERLAP FIT (needs hearth to sit on)

When the fireplace door is larger than the opening of the fireplace. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth (where the door will sit) to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

INSIDE FIT (inside firebox opening)

When the fireplace door is smaller than the opening of the fireplace, and fits inside of the fireplace opening. Measure the width of the opening at the top and again at the bottom. We need the exact minimum width. Next, measure the height of the opening from the hearth/floor to either the bottom of the lintel bar or the bottom of the finishing material (brick, marble, etc). We need the exact minimum height.

 

DO NOT make adjustments to sizes, we need the EXACT OPENING size

in
in
$1,005.00
Available
INSIDE FIT - Generally, the clearance tolerance gaps can be filled from the backside of the frame using high temp silicone RTV. If the gaps become excessive (as in a stone fireplace), it may be necessary to mortar in the enclosure. Clearance tolerance gaps are determined by the manufacturer according to your opening size.
I understand that, by checking this box, I am signing this document and agree to be legally bound by these terms and conditions listed on the website.
If no images are submitted with your order, it will be placed on hold until we receive a photo of your fireplace. Please send your image to support@fireplacedoorsonline.com.
+
Compare

   Free Shipping on All Orders Continental United States!  Free Shipping | Fabrication Time 4-5 Weeks Question | Why Buy From Us?

The Stiletto Masonry Fireplace Door by Design Specialties will offer a warm and wide view of your fireplace. The clear tempered glass option will instantly create a cozy focus point for your living space. If you prefer a softer look the tempered glass panels are also available in bronze and grey. For an upgrade, you can add the bold look of the black tempered glass. Shown in the always popular Mahogany, you can choose the perfect color for your home from over 20 rich color finish choices. The options seem limitless with this masonry fireplace door that fits overlap fireplace designs or can be designed for an inside fit. The aluminum frame design features precise lines for an open fireplace view and works with slate, granite, tile, marble, or an inside fit for your brick facing. Your new Stiletto Masonry Fireplace Door will arrive fully assembled and will include all mounting hardware. Add an additional layer of safety with the spark protection  Sliding Black Mesh Curtain or add an extra home accent with the Cabinet Mesh Doors.

About the Stiletto Door Fit:

  • 3-Sided Overlap with 15/16 inch frame = design provides an approximate 1/2 inch overlap on each side and 1/2 inch overlap on top (will need a hearth to sit on)
  • Inside fit will fit inside fireplace opening and door is made slighlty smaller to fit into fireplace opening (No hearth needed)
  • Exact FIT door will be fabricated to the dimension selected in price caluculator!

Please note: Sliding mesh will add 2 inches of depth (on top of the frame dimension) into your firebox. Cabinet mesh adds 3/4 inch.


Stiletto Masonry Fireplace Door Features Product Features:

  • The Stiletto Fireplace Door is for masonry fireplaces ONLY
  • Enjoy free shipping; please allow 4 weeks for production and transit time
  • 1 year warranty on workmanship; 2 year workmanship on metal frame (excluding finish)
  • Lifetime limited warranty on tempered glass
  • Available as both an inside and overlap fit
  • Frame will overlap approximately 1/2 inch
  • Choose from trackless bi-fold or cabinet style doors
  • The aluminum frame is 15/16 inch wide and 1  5/8 inches deep
  • Check out the videos for the available door finishes
  • 1/4 inch thick tempered safety glass can be tinted grey, clear, bronze, or black
  • Spark protection not included
  • 6 handle styles to choose from
  • Door comes fully assembled with all mounting hardware included
  • NOTE: In order to burn a fire with the doors closed, the temperature of the fire cannot exceed 400°. The flames must always be 6 inches away from the glass.

 

Color SwatchesThere are many different finishes that vary between manufacturers. You can order frame color samples here or if you just want a closer look you can watch one of our YouTube videos. Visit our color swatch page to see all of the different color variations up close.

Stiletto Masonry Fireplace Door Specifications Product Specifications:

  • Fireplace Type: Masonry
  • Door Fit: Overlap | Inside
  • Door Type: Cabinet Doors | Trackless Bi-Fold Doors
  • Material: 15/16" Wide x 1 5/8" Deep Aluminum Frame
  • Approximate Overlap: 1/2"
  • Recessed Depth: NA - The portion of the door that fits inside the opening when installed as an overlap fit - Does NOT apply to Sliding Mesh And Gate Mesh Doors
  • Glass: 1/4" Tempered Safety Glass
  • Glass Tints: Grey | Bronze | Clear
  • Ceramic Glass: N/A
  • Mesh Screen: Not Included
  • Handle Style: Simplicity | Square
  • Damper: No Draft Assembly | With Draft Assembly
  • Airtight Option: N/A
  • Assembly: Comes Fully Assembled
  • Mounting: Hardware Included
  • Please note: Sliding mesh will add 2 inches of depth (on top of the frame dimension) into your firebox. Cabinet mesh adds 3/4 inch.

  Manual Page 1 - StilettoManual Page 2 - StilettoManual Page 3 - Stiletto

Manufacturer's Warranty

NAPOLEON products are manufactured under the strict Standard of the world recognized ISO 9001 : 2008 Quality Assurance Certificate. NAPOLEON products are designed with superior components and materials assembled by trained craftsmen who take great pride in their work. The burner and valve assembly are leak and test-fired at a quality test station. The complete appliance is again thoroughly inspected by a qualifi ed technician before packaging to ensure that you, the customer, receives the quality product that you expect from NAPOLEON. The following materials and workmanship in your new NAPOLEON gas appliance are warranted against defects for as long as you own the appliance. This covers: combustion chamber, heat exchanger, stainless steel burner, phazer™ logs and embers, rocks, ceramic glass (thermal breakage only), gold plated parts against tarnishing, porcelainized enameled components and aluminum extrusion trims.* Electrical (110V and millivolt) components and wearable parts are covered and NAPOLEON will provide replacement parts free of charge during the fi rst year of the limited warranty. This covers: blowers, gas valves, thermal switch, switches, wiring, remote controls, ignitor, gasketing, and pilot assembly.* Labour related to warranty repair is covered free of charge during the fi rst year. Repair work, however, requires the prior approval of an authorized company offi cial. Labour costs to the account of NAPOLEON are based on a predetermined rate schedule and any repair work must be done through an authorized NAPOLEON dealer. * Construction of models vary. Warranty applies only to components included with your specifi c appliance. NAPOLEON GAS APPLIANCE PRESIDENT’S LIFETIME LIMITED WARRANTY

No reviews found

Questions
Possibly you may be interested
  • Most Popular
  • On Sale
  • Recently Viewed
 
Fast and high quality delivery

Our company makes delivery all over the country

Quality assurance and service

We offer only those goods, in which quality we are sure

Returns within 30 days

You have 30 days to test your purchase